Brand Name : TEYI
Model Number : H46
Certification : CE/API/SGS
Place of Origin : Zhejiang, China
MOQ : 1-20PCS
Price : negotiation
Supply Ability : 500pcs per month
Delivery Time : 7-15 working days after received payment
Packaging Details : Packed in carton firstly, and then reinforced with wooden case for outer packing
Product Name : Flanged Foot Valve
Material : Cast Iron, Ductile Iron
Connection Form : Flange
Size : 2"-32"(DN50-DN800)
Pressure : 0.6-1.6Mpa( Class125LB)
Medium : Water
Cast Ductile Iron Flanged Foot Valve with check type structure PN10 PN16
Product Description
Features
1.Designed for long service life
Ductile iron body maintains the anti-corrosive properties of cast iron while achieving a yield strength comparable to carbon steel.Ductile Iron also offers higher pressure/temperature ratings than cast iron .carbon and stainless steel units are also available upon request.
2.Minimal Head Loss
Head loss is minimized by providing a large cross-sectional area which exceeds that of the adjacent pipeling .additionally,the spring-loaded,canted guided disc id designed with very low carcking pressure which reduces the amount of energy required to open the valve.
3.Quick closure to reduce weater hammer
Silent shut-off is achived via the fully automatic.spring assisted disc that closes near zero flow velocity.the lightweight ,center guided disc design creates a ositive shut off prior to flow reversal and helps to keep slamming and surges to a minimum.
4.Numerous screeen options
The standard screen construction material is type-304 stainless steel. iddition, a wide variety perforations,meshes,and materials are readily available.screens can be basket shaped or cone shaped.
Cast Ductile Iron Foot Valve with check type structure PN10 PN16
Applications
1. A foot valve is a special type of check valvethat has a built-in strainer.It is installed at the intake side of a suction pipe and pump.its popose is to pprevent the loss of prime when the liquid source (wet well) is lower than the pump.prime is desined as the charge of loquid required to begin pumping action and priming is the process of fillling the pump and suction pipe with liquid.
2.The check valve part of the foot valve opens when the pump starts to allow liquid to enter the suction pipe and pump.when the pump stops the check valves closes and prevents the liquid from emptying.thus the foot valve eliminates the need too prime the pump each time it is started.the strainer component of the foot valve helps to romove unwanted debris from the liquid that may cause damage to the pump.
Standards
Design - DIN,BS, API
Face to Face & End to End - DIN
Flange drilling - DIN
PN : 10,16
DN : 50~300 mm
Body&Bonnet: Cast Iron, Ductile Iron
Disc: Ductile Iron
Seal ring: SS+graphite, PTFE, RPTFE, EPDM, NBR
Stem: 1045, 2CR13,304,316,304L,316L,17-4PH
-196 °C --- 650 °C;
A: We are factory.
A: according to the order,7~60days.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Website: www.cteyi.com
Whatsapp: +86-18066275598
Wechat: 18066275598
Skype: jennyxiaojing
Email: tyd@cteyi.com
Tel: +86-577-56750056
Cast Ductile Iron Flanged Foot Valve with check type structure PN10 PN16 Images |